• High-intensity LED light source for efficient and reliable curing of dental materials.
• Lightweight and ergonomic design for comfortable handling and reduced hand fatigue during extended use.
• Digital display for easy monitoring of curing time and power settings.
• The blue light wavelength of approximately 385nm to 515nm to activate photoinitiators and ensure proper material curing.
• User-friendly interface with intuitive controls for convenient operation.
• Durable construction and high-quality materials for long-lasting performance.

High-power LED curing light with rapid 1-second curing capability.

• Adapter Input: AC 100~240V , 50Hz/60Hz
• Output: DC 5V1A
• High power: Blue Light 5W
• Wavelength: 385nm to 515nm
• Size: 268.8mm*26.1 mm*31.8mm
• Intensity High: 2300~2500 MW/cm2
• Intensity Normal: 1000~1200 MW/cm2
• Net Weight: 259g
• Battery Model:  ICR 18490
• Battery capacity: 1400mAh
• A full charge can be used for more than 400 times continuously under 10s working time mode.

• 1 x  Main Unit of the LED
• 1 x Light Hood
• 1 x Adapter
• 1 x Pedestal Charger
• 50 x Disposable Light Cure Sleeves
• 1 x Instruction Manual

Charging:

• • Before using the curing light for the first time, recharge the battery for at least 4 hours.
  • Connect the plug of the adapter to the AC100V~240V power supply.
  • Connect the output plug of the adapter to the DC 5V input plug of the charging cradle.
  • Place the main unit into the charging cradle.
  • Allow the battery to fully charge, and then unplug the adapter.

Mode and Time Setting:

• • Press the mode button to select the working mode (High or Norm).
  • The corresponding indicator will illuminate when a mode is set.
  • Press the time button to set the solidifying time according to the selected mode.
  • High Mode: Choose between 1 second (1S) or 3 seconds (3S).
  • Norm Mode: Choose between 5 seconds (5S), 10 seconds (10S), 15 seconds (15S), or 20 seconds (20S).

Operation:

• • Position the top of the main unit at the desired area for solidification.
  • Press the power button to activate the curing light.
  • A “di” sound will indicate the light is working, and the LED will emit blue light.
  • The countdown time will be displayed on the screen.
  • Once the countdown reaches 0, the work is complete, and the screen will return to the set time.
  • To stop the operation at any time, press the power switch button.
  • For immediate consecutive use, short-press the button to start the next working cycle.
  • Note: If the main unit becomes significantly hot, turn off the device until it cools down. Avoid continuous illumination for more than 10 times.

Low Power and Charging:

• • The main unit has a low-power detection circuit.
  • When low power is detected, the battery symbol display LED will flash.
  • Charge the device promptly by connecting the adapter and placing the main unit into the charging cradle.
  • The Charge LED will turn red during charging.
  • Ensure a good connection between the main unit and the charging cradle by pressing the buckle firmly.
  • Clean the top of the main unit with a clean cloth to maintain light intensity and prevent contamination.

Safety Precautions:

• • Always wear a disposable isolation cover before using the machine.
  • Aim the light straightly at the resin to ensure proper solidification.
  • Use the original light hood provided to protect your eyes from blue light. Avoid direct exposure to eyes.
  • Only use the original adapter provided, as other brands may damage the circuit.
  • Avoid touching the charging point of the main unit with metal or conductive materials to prevent damage or short circuit.
  • Charge the battery in a cool and ventilated environment.
  • Do not disassemble the lithium battery, as it may cause circuit short or electrolyte leakage.
  • Avoid squeezing, shaking, or short-circuiting the battery. Do not store the battery with metal materials.
  • Ensure proper use of the device in accordance with safety classifications and contraindications mentioned in the manual.

• Country of Origin: PRC
• Manufacturer: Woodpecker

• Manufacturer/Importer warranty of 12 months as applicable for this product
• Service and Warranty are handled by the manufacturer/importer directly for this product
  
• Supreme Dental will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Supreme Dental and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Supreme Dental may assist the customer in registering a request to get the Product replaced or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.