• Dynamic torque control prevents needle breakage.
• Cordless design for flexible and easy use.
• Versatile compatibility with various file systems.
• Clear OLED screen for real-time feedback.
• Nine user-defined modes for personalized settings.
• Nimble autoclavable contra-angle for infection prevention.
• Imported motor for strong power and efficiency.

• Power Source: Lithium Battery (3.6V / 750mAh)
• Torque: 0.6Ncm-5.0Ncm(6mNm ~ 50mNm)
• Screen Type: All-Angle OLED
• Contra-angle Gear Ratio: 1:1
• User Modes: 9 Customizable Modes
• Contra-Angle Features: Autoclavable, Adjustable Angle
• Motor Type: Imported (15.5:1 Reduction Ratio)
• Operating Environment: +5°C to +40°C, 30% to 75% humidity
• Storage Environment: -20°C to +55°C
• Sterilization: Autoclavable Contra-Angle
• Power Adapter: Input( ~100V-240V 50Hz/60Hz 0.5-0.2A Max) and Output (DC5V/1A)
• Environment Temperature: +5℃ ~ +40℃
• Atmospheric Pressure: 70kPa ~ 106kPa
• Rotate speed: 100rpm~1000rpm

Note: The handpiece cannot be autoclaved. Use disinfectant of neutral pH value or ethyl alcohol to wipe its surface.

• 1 x Motor Handpiece
• 1 x Contra-angle
• 1 x Charging base
• 1 x Lubricator
• 1 x Power adapter
• Instructional Manual

Power On/Off:

• Press the key to power on.
• Long press setting key for 2s to power off.

Mode Selection:

• Press key or key to switch between modes.
• Long press for fast mode handover.

Memory Mode:

• Press key or key to select from 9 user-defined modes.

Speed Setting:

• In Speed Setting Interface:
• Press + to increase speed.
• Press – to decrease speed.
• Long press for fast adjustments.

Torque Setting:

• In Torque Setting Interface:
• Press + to increase torque.
• Press – to decrease torque.
• Long press for fast adjustments.

File Installation:

• Before starting, plug the file into the contra-angle.
• Slightly screw the file while pressing the contra-angle cover.

File Removal:

• Press the contra-angle cover and pull out the file.

Charging:

• Connect the power adapter to the base.
• Place the handpiece in the base.
• Charging indicator turns yellow (charging) or green (fully charged).
• Unplug after charging.

Contra-Angle Calibration:

• Long press setting key, then long press for 2s.
• Wait for successful calibration interface.

Automatic Torque Calibration:

• Choose Torque Calibrating mode.
• Reduces torque fluctuation after sterilization or replacement.

Oiling of Contra-Angle:

• Use original oil injection nozzle.
• Grease contra-angle for 2-3s.

Cleaning and Sterilization:

• Follow the step-by-step cleaning and sterilization procedure in the manual.

• Country of Origin: PRC
• Manufacturer: Woodpecker

• Manufacturer/Importer warranty of 1 Year against manufacturing defect
• Service and Warranty are handled by the manufacturer/importer directly for this product
  
• Supreme Dental will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Supreme Dental and the Buyer acknowledge that the Products purchased/used are a subject matter of the original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Supreme Dental may assist the customer in registering a request to get the Product replaced or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered with as the case may be.